Details
Brief Introduction
Coated and Laminated Basalt Fiber Tapes is standard basalt tape combined with a coating, foil or pressure-sensitive adhesive. It provides overseas buyers with a practical basalt-based solution for radiant heat shields, exhaust wrapping, furnace insulation, assembly positioning and OEM thermal protection. The product combines the inherent thermal and corrosion resistance of basalt fiber with a construction selected for handling, conversion and end-use performance.
The quoted grade should always be matched to the actual service environment. Buyers should identify the required dimensions, construction, continuous and peak temperatures, contact medium, mechanical load, installation method and applicable test standard. The final construction, surface treatment and packaging can then be adjusted to the approved purchasing specification.
Product Advantages
-Value-added surface functions.
-Faster installation.
-Radiant heat options.
-Reduced fraying.
-Basalt-based construction provides a non-asbestos, corrosion-resistant alternative for appropriate industrial applications.
-The product can be supplied in OEM dimensions and packaging when production capability and minimum order quantity are confirmed.
Types by Construction or Weave Pattern
Silicone-Coated Basalt Fiber Tape: Flexible coated tape for sealing and splash protection.
Buyer note: Silicone-coated basalt fiber tape is flexible and conformable, with a sealed surface for splash and handling protection. It can be supplied one-side or two-side coated, depending on whether the reverse face must remain bondable.
Vermiculite-Coated Basalt Fiber Tape: Mineral-coated tape for furnace and exhaust wrapping.
Buyer note: Vermiculite-coated basalt fiber tape is a mineral-finished tape for hot joints, furnace wrapping and exhaust protection. The surface is more abrasion-oriented and less elastic than silicone.
Aluminum-Foil-Laminated Basalt Fiber Tape: Reflective tape for radiant heat zones.
Buyer note: Aluminum-foil-laminated basalt fiber tape is designed for radiant heat reflection rather than direct flame sealing. Specify foil thickness, adhesive system and whether the foil must withstand repeated flexing.
Adhesive-Backed Basalt Fiber Tape: Self-positioning tape for faster OEM assembly.
Buyer note: Adhesive-backed basalt fiber tape is intended for positioning, temporary fixing or localized protection. Specify adhesive chemistry, peel strength, dwell time and the maximum temperature of the adhesive layer.
Product Classification
-Product family: Coated and Laminated Basalt Fiber Tapes.
-Construction or product form: Silicone-Coated Basalt Fiber Tape, Vermiculite-Coated Basalt Fiber Tape, Aluminum-Foil-Laminated Basalt Fiber Tape or Adhesive-Backed Basalt Fiber Tape.
-Surface condition: uncoated or product-specific treatment as stated in the product name and approved specification.
-Supply grade: standard industrial grade, converter grade, OEM grade or custom grade.
-Commercial size range: 20-200 mm width; finished thickness by construction.
Product Performance
The principal commercial benefit of Coated and Laminated Basalt Fiber Tapes is value-added surface functions, faster installation, radiant heat options, reduced fraying. Performance depends on yarn grade, construction density, surface treatment, dimensions and the severity and duration of exposure. Basalt fiber normally provides useful heat stability and resistance to many corrosive environments, but compatibility must be confirmed with the actual chemical, pressure, abrasion and thermal cycle.
-Thermal performance: specify continuous service temperature, short-term peak temperature, exposure duration and whether radiant heat or direct flame is present.
-Mechanical performance: Value-added surface functions; verify tensile, tear, compression, abrasion or flex data appropriate to the product form.
-Fire performance: test the finished product because sizing, binder, coating, adhesive, foil and sewing materials can change flame spread, smoke and after-flame behavior.
-Chemical performance: verify resistance to the named acid, alkali, oil, fuel, steam, salt, solvent or process gas at the specified concentration and temperature.
-Quality consistency: control appearance, dimensions, mass, construction, treatment add-on, roll or coil length and batch traceability.
Technical Data Parameters
The following items should appear on the final technical data sheet or purchase specification:
-Primary size range: 20-200 mm width; finished thickness by construction.
-Construction: Silicone-Coated Basalt Fiber Tape, Vermiculite-Coated Basalt Fiber Tape, Aluminum-Foil-Laminated Basalt Fiber Tape or Adhesive-Backed Basalt Fiber Tape.
-Material composition: basalt fiber content plus complete identification of sizing, binder, coating, adhesive, film, foil, core or sewing thread where applicable.
-Dimensional data: nominal width, diameter, section, thickness, length and the agreed tolerance for each relevant dimension.
-Physical data: mass per unit area or length, density, coating add-on, porosity or air permeability when relevant.
-Mechanical data: tensile strength, tear strength, compression recovery, abrasion resistance, peel strength or burst strength as applicable.
-Thermal data: continuous temperature, short-term peak, linear shrinkage, thermal conductivity or radiant-heat performance when required.
-Finished color and appearance: natural basalt color or coating-dependent color, with an agreed visual acceptance standard.
-Supply form: roll, reel, coil, bag, carton or pallet, including unit length, joints policy, core size and labeling.
SPECIFICATION
ITEM | DESCRIPTION |
Product name | Coated and Laminated Basalt Fiber Tapes |
Product classification | Silicone-Coated Basalt Fiber Tape, Vermiculite-Coated Basalt Fiber Tape, Aluminum-Foil-Laminated Basalt Fiber Tape or Adhesive-Backed Basalt Fiber Tape |
Primary size range | 20-200 mm width; finished thickness by construction |
Construction or weave pattern | Silicone-Coated Basalt Fiber Tape, Vermiculite-Coated Basalt Fiber Tape, Aluminum-Foil-Laminated Basalt Fiber Tape or Adhesive-Backed Basalt Fiber Tape |
Material and treatment | Basalt fiber plus the approved sizing, coating, adhesive, foil, binder or core system |
Dimensions and tolerance | Width, diameter, thickness, length or section and tolerance to be confirmed in the approved purchase specification |
Temperature rating | Continuous service, short-term peak, exposure duration and direct-flame condition to be stated separately |
Mechanical data | Tensile, tear, compression, abrasion, peel or burst properties as applicable to the product form |
Supply form | Roll, reel, coil, bag, carton or pallet; unit length and joints policy to be agreed |
Customization | Dimensions, treatment, color, packaging, labeling and private label subject to capability and MOQ |
Specifications are for reference only. For exact dimensions, performance requirements, customization, testing and project-specific recommendations, please contact us.
Applications
-Radiant heat shields: use coated and laminated basalt fiber tapes where its construction and verified performance match the operating conditions.
-Exhaust wrapping: use coated and laminated basalt fiber tapes where its construction and verified performance match the operating conditions.
-Furnace insulation: use coated and laminated basalt fiber tapes where its construction and verified performance match the operating conditions.
-Assembly positioning and OEM thermal protection: use coated and laminated basalt fiber tapes where its construction and verified performance match the operating conditions.
-OEM fabrication: Coated and Laminated Basalt Fiber Tapes may be cut, sewn, wrapped, laminated, molded or assembled into finished thermal or reinforcement components when the selected grade supports the process.
-Maintenance and retrofit projects: useful for replacement, localized protection and upgrade work where installation access and shutdown time are important selection factors.
Transport and Storage
-Transport coated and laminated basalt fiber tapes in dry, covered vehicles and protect it from rain, crushing, puncture and contamination.
-Keep the original label and batch identification intact; do not drag rolls, reels or coils across rough floors.
-Store indoors in the original sealed packaging, ideally at 5-35 C and below 70% relative humidity.
-Keep away from incompatible chemicals, direct sunlight and ignition sources. Apply FIFO and confirm shelf life for treated or coated grades.
FAQ
Q: What information is required to quote Coated and Laminated Basalt Fiber Tapes?
A: Specify 20-200 mm width; finished thickness by construction, required construction, operating temperature, exposure medium, installation method, quantity, destination and applicable test standard.
Q: How should a buyer select the correct type of Coated and Laminated Basalt Fiber Tapes?
A: Select first by function, then by construction, dimensions, mechanical demand, thermal cycle and chemical exposure. A sample trial is recommended when replacing another material.
Q: What continuous and peak temperatures can Coated and Laminated Basalt Fiber Tapes withstand?
A: The values must be confirmed for the complete finished construction. Continuous service, short-term peak, radiant exposure and direct flame are different conditions, and the lowest-rated component controls the product rating.
Q: Can Coated and Laminated Basalt Fiber Tapes be customized for OEM orders?
A: Yes. Dimensions, construction, surface treatment, color, unit length, packaging and private labeling can be discussed, subject to manufacturing capability and MOQ.
Q: How is Coated and Laminated Basalt Fiber Tapes installed or processed?
A: The method depends on the product form and may include wrapping, clamping, sewing, bonding, molding or mechanical fastening. The buyer should approve installation instructions and accessory compatibility before use.
Q: Does Coated and Laminated Basalt Fiber Tapes contain asbestos?
A: Basalt fiber products are normally manufactured as non-asbestos materials. A supplier declaration or third-party report should support any formal compliance claim.
Q: Which Coated and Laminated Basalt Fiber Tapes types are available?
A: The available product names are Silicone-Coated Basalt Fiber Tape, Vermiculite-Coated Basalt Fiber Tape, Aluminum-Foil-Laminated Basalt Fiber Tape, Adhesive-Backed Basalt Fiber Tape. Selection depends on the required structure, drape, compression, surface behavior or fabrication method.
Q: Can different Coated and Laminated Basalt Fiber Tapes types be supplied under one project?
A: Yes. A project may use more than one Coated and Laminated Basalt Fiber Tapes type, but every type should have its own item code, dimensions, acceptance criteria and packaging label.
Q: What is the specific advantage of Silicone-Coated Basalt Fiber Tape?
A: Silicone-coated basalt fiber tape is flexible and conformable, with a sealed surface for splash and handling protection. It can be supplied one-side or two-side coated, depending on whether the reverse face must remain bondable. The final choice should be confirmed against the buyer's temperature, chemical, mechanical and installation requirements.
Q: What is the specific advantage of Vermiculite-Coated Basalt Fiber Tape?
A: Vermiculite-coated basalt fiber tape is a mineral-finished tape for hot joints, furnace wrapping and exhaust protection. The surface is more abrasion-oriented and less elastic than silicone. The final choice should be confirmed against the buyer's temperature, chemical, mechanical and installation requirements.
Q: What is the specific advantage of Aluminum-Foil-Laminated Basalt Fiber Tape?
A: Aluminum-foil-laminated basalt fiber tape is designed for radiant heat reflection rather than direct flame sealing. Specify foil thickness, adhesive system and whether the foil must withstand repeated flexing. The final choice should be confirmed against the buyer's temperature, chemical, mechanical and installation requirements.
Q: What is the specific advantage of Adhesive-Backed Basalt Fiber Tape?
A: Adhesive-backed basalt fiber tape is intended for positioning, temporary fixing or localized protection. Specify adhesive chemistry, peel strength, dwell time and the maximum temperature of the adhesive layer. The final choice should be confirmed against the buyer's temperature, chemical, mechanical and installation requirements.
Q: How should the coating or lamination on Coated and Laminated Basalt Fiber Tapes be specified?
A: State coating chemistry, coated side, color, add-on or finished mass, adhesion requirement, flexibility, operating temperature and the exact chemical or weather exposure.
