Details
Brief Introduction
Coated and Laminated Basalt Fiber Sleeving is basalt sleeving upgraded with elastomeric coating or reflective foil. It provides overseas buyers with a practical basalt-based solution for hydraulic hoses, foundries, steelworks, engine bays, electrical harnesses and radiant-heat zones. The product combines the inherent thermal and corrosion resistance of basalt fiber with a construction selected for handling, conversion and end-use performance.
The quoted grade should always be matched to the actual service environment. Buyers should identify the required dimensions, construction, continuous and peak temperatures, contact medium, mechanical load, installation method and applicable test standard. The final construction, surface treatment and packaging can then be adjusted to the approved purchasing specification.
Product Advantages
-Molten splash and radiant heat options.
-Cleaner handling.
-Flexible protection.
-OEM fabrication.
-Basalt-based construction provides a non-asbestos, corrosion-resistant alternative for appropriate industrial applications.
-The product can be supplied in OEM dimensions and packaging when production capability and minimum order quantity are confirmed.
Types by Construction or Weave Pattern
Silicone-Coated Basalt Fire Sleeve: Flexible fire sleeve for hydraulic hoses and molten splash zones.
Buyer note: Silicone-coated basalt fire sleeve is intended for hose and cable protection against radiant heat, hot splash and brief molten-metal exposure. The sleeve protects the line while remaining flexible enough for routing and maintenance.
Acrylic-Coated Basalt Fiber Sleeving: Dimensionally stable sleeve with reduced fraying.
Buyer note: Acrylic-coated basalt fiber sleeving improves abrasion resistance, surface cohesion and handling cleanliness for electrical harnesses and industrial assemblies. It is not interchangeable with a silicone fire sleeve without service testing.
PU-Coated Basalt Fiber Sleeving: Flexible abrasion-resistant sleeve for harnesses and assemblies.
Buyer note: PU-coated basalt fiber sleeving provides a flexible abrasion barrier and can be color-coded for assembly control. Confirm the temperature and solvent limits of the polyurethane layer.
Foil-Laminated Basalt Thermal Sleeve: Reflective sleeve for radiant heat management.
Buyer note: Foil-laminated basalt thermal sleeve reflects radiant heat and is useful around exhausts and hot housings. It should be designed with an air gap or insulation layer when the goal is temperature reduction rather than reflection alone.
Product Classification
-Product family: Coated and Laminated Basalt Fiber Sleeving.
-Construction or product form: Silicone-Coated Basalt Fire Sleeve, Acrylic-Coated Basalt Fiber Sleeving, PU-Coated Basalt Fiber Sleeving or Foil-Laminated Basalt Thermal Sleeve.
-Surface condition: uncoated or product-specific treatment as stated in the product name and approved specification.
-Supply grade: standard industrial grade, converter grade, OEM grade or custom grade.
-Commercial size range: 3-150 mm nominal inside diameter depending on construction.
Product Performance
The principal commercial benefit of Coated and Laminated Basalt Fiber Sleeving is molten splash and radiant heat options, cleaner handling, flexible protection, OEM fabrication. Performance depends on yarn grade, construction density, surface treatment, dimensions and the severity and duration of exposure. Basalt fiber normally provides useful heat stability and resistance to many corrosive environments, but compatibility must be confirmed with the actual chemical, pressure, abrasion and thermal cycle.
-Thermal performance: specify continuous service temperature, short-term peak temperature, exposure duration and whether radiant heat or direct flame is present.
-Mechanical performance: Molten splash and radiant heat options; verify tensile, tear, compression, abrasion or flex data appropriate to the product form.
-Fire performance: test the finished product because sizing, binder, coating, adhesive, foil and sewing materials can change flame spread, smoke and after-flame behavior.
-Chemical performance: verify resistance to the named acid, alkali, oil, fuel, steam, salt, solvent or process gas at the specified concentration and temperature.
-Quality consistency: control appearance, dimensions, mass, construction, treatment add-on, roll or coil length and batch traceability.
Technical Data Parameters
The following items should appear on the final technical data sheet or purchase specification:
-Primary size range: 3-150 mm nominal inside diameter depending on construction.
-Construction: Silicone-Coated Basalt Fire Sleeve, Acrylic-Coated Basalt Fiber Sleeving, PU-Coated Basalt Fiber Sleeving or Foil-Laminated Basalt Thermal Sleeve.
-Material composition: basalt fiber content plus complete identification of sizing, binder, coating, adhesive, film, foil, core or sewing thread where applicable.
-Dimensional data: nominal width, diameter, section, thickness, length and the agreed tolerance for each relevant dimension.
-Physical data: mass per unit area or length, density, coating add-on, porosity or air permeability when relevant.
-Mechanical data: tensile strength, tear strength, compression recovery, abrasion resistance, peel strength or burst strength as applicable.
-Thermal data: continuous temperature, short-term peak, linear shrinkage, thermal conductivity or radiant-heat performance when required.
-Finished color and appearance: natural basalt color or coating-dependent color, with an agreed visual acceptance standard.
-Supply form: roll, reel, coil, bag, carton or pallet, including unit length, joints policy, core size and labeling.
SPECIFICATION
ITEM | DESCRIPTION |
Product name | Coated and Laminated Basalt Fiber Sleeving |
Product classification | Silicone-Coated Basalt Fire Sleeve, Acrylic-Coated Basalt Fiber Sleeving, PU-Coated Basalt Fiber Sleeving or Foil-Laminated Basalt Thermal Sleeve |
Primary size range | 3-150 mm nominal inside diameter depending on construction |
Construction or weave pattern | Silicone-Coated Basalt Fire Sleeve, Acrylic-Coated Basalt Fiber Sleeving, PU-Coated Basalt Fiber Sleeving or Foil-Laminated Basalt Thermal Sleeve |
Material and treatment | Basalt fiber plus the approved sizing, coating, adhesive, foil, binder or core system |
Dimensions and tolerance | Width, diameter, thickness, length or section and tolerance to be confirmed in the approved purchase specification |
Temperature rating | Continuous service, short-term peak, exposure duration and direct-flame condition to be stated separately |
Mechanical data | Tensile, tear, compression, abrasion, peel or burst properties as applicable to the product form |
Supply form | Roll, reel, coil, bag, carton or pallet; unit length and joints policy to be agreed |
Customization | Dimensions, treatment, color, packaging, labeling and private label subject to capability and MOQ |
Specifications are for reference only. For exact dimensions, performance requirements, customization, testing and project-specific recommendations, please contact us.
Applications
-Hydraulic hoses: use coated and laminated basalt fiber sleeving where its construction and verified performance match the operating conditions.
-Foundries: use coated and laminated basalt fiber sleeving where its construction and verified performance match the operating conditions.
-Steelworks: use coated and laminated basalt fiber sleeving where its construction and verified performance match the operating conditions.
-Engine bays: use coated and laminated basalt fiber sleeving where its construction and verified performance match the operating conditions.
-Electrical harnesses and radiant-heat zones: use coated and laminated basalt fiber sleeving where its construction and verified performance match the operating conditions.
-OEM fabrication: Coated and Laminated Basalt Fiber Sleeving may be cut, sewn, wrapped, laminated, molded or assembled into finished thermal or reinforcement components when the selected grade supports the process.
-Maintenance and retrofit projects: useful for replacement, localized protection and upgrade work where installation access and shutdown time are important selection factors.
Transport and Storage
-Transport coated and laminated basalt fiber sleeving in dry, covered vehicles and protect it from rain, crushing, puncture and contamination.
-Keep the original label and batch identification intact; do not drag rolls, reels or coils across rough floors.
-Store indoors in the original sealed packaging, ideally at 5-35 C and below 70% relative humidity.
-Keep away from incompatible chemicals, direct sunlight and ignition sources. Apply FIFO and confirm shelf life for treated or coated grades.
FAQ
Q: What information is required to quote Coated and Laminated Basalt Fiber Sleeving?
A: Specify 3-150 mm nominal inside diameter depending on construction, required construction, operating temperature, exposure medium, installation method, quantity, destination and applicable test standard.
Q: How should a buyer select the correct type of Coated and Laminated Basalt Fiber Sleeving?
A: Select first by function, then by construction, dimensions, mechanical demand, thermal cycle and chemical exposure. A sample trial is recommended when replacing another material.
Q: What continuous and peak temperatures can Coated and Laminated Basalt Fiber Sleeving withstand?
A: The values must be confirmed for the complete finished construction. Continuous service, short-term peak, radiant exposure and direct flame are different conditions, and the lowest-rated component controls the product rating.
Q: Can Coated and Laminated Basalt Fiber Sleeving be customized for OEM orders?
A: Yes. Dimensions, construction, surface treatment, color, unit length, packaging and private labeling can be discussed, subject to manufacturing capability and MOQ.
Q: How is Coated and Laminated Basalt Fiber Sleeving installed or processed?
A: The method depends on the product form and may include wrapping, clamping, sewing, bonding, molding or mechanical fastening. The buyer should approve installation instructions and accessory compatibility before use.
Q: Does Coated and Laminated Basalt Fiber Sleeving contain asbestos?
A: Basalt fiber products are normally manufactured as non-asbestos materials. A supplier declaration or third-party report should support any formal compliance claim.
Q: Which Coated and Laminated Basalt Fiber Sleeving types are available?
A: The available product names are Silicone-Coated Basalt Fire Sleeve, Acrylic-Coated Basalt Fiber Sleeving, PU-Coated Basalt Fiber Sleeving, Foil-Laminated Basalt Thermal Sleeve. Selection depends on the required structure, drape, compression, surface behavior or fabrication method.
Q: Can different Coated and Laminated Basalt Fiber Sleeving types be supplied under one project?
A: Yes. A project may use more than one Coated and Laminated Basalt Fiber Sleeving type, but every type should have its own item code, dimensions, acceptance criteria and packaging label.
Q: What is the specific advantage of Silicone-Coated Basalt Fire Sleeve?
A: Silicone-coated basalt fire sleeve is intended for hose and cable protection against radiant heat, hot splash and brief molten-metal exposure. The sleeve protects the line while remaining flexible enough for routing and maintenance. The final choice should be confirmed against the buyer's temperature, chemical, mechanical and installation requirements.
Q: What is the specific advantage of Acrylic-Coated Basalt Fiber Sleeving?
A: Acrylic-coated basalt fiber sleeving improves abrasion resistance, surface cohesion and handling cleanliness for electrical harnesses and industrial assemblies. It is not interchangeable with a silicone fire sleeve without service testing. The final choice should be confirmed against the buyer's temperature, chemical, mechanical and installation requirements.
Q: What is the specific advantage of PU-Coated Basalt Fiber Sleeving?
A: PU-coated basalt fiber sleeving provides a flexible abrasion barrier and can be color-coded for assembly control. Confirm the temperature and solvent limits of the polyurethane layer. The final choice should be confirmed against the buyer's temperature, chemical, mechanical and installation requirements.
Q: What is the specific advantage of Foil-Laminated Basalt Thermal Sleeve?
A: Foil-laminated basalt thermal sleeve reflects radiant heat and is useful around exhausts and hot housings. It should be designed with an air gap or insulation layer when the goal is temperature reduction rather than reflection alone. The final choice should be confirmed against the buyer's temperature, chemical, mechanical and installation requirements.
Q: How should the coating or lamination on Coated and Laminated Basalt Fiber Sleeving be specified?
A: State coating chemistry, coated side, color, add-on or finished mass, adhesion requirement, flexibility, operating temperature and the exact chemical or weather exposure.
